Uniden BC246T User Manual
70
Programming/Editing Optional Settings
Notes:
• The scanner defaults to AFS (agency, fleet, subfleet)
format - the format used in most EDACS systems.
• See “EDACS Trunking” on Page 25 for more
information about the AFS format.
Setting Control-Channel Only
(Motorola Systems Only)
(Motorola Systems Only)
program system
E
Select the system
E
Edit Sys Option
E
Set C
-CH Only
E
This setting determines the frequencies you need to enter
for Motorola systems. Select your setting, then press E.
for Motorola systems. Select your setting, then press E.
Off
- you must enter all voice and control channel
frequencies.
On
- you only need to enter control channel frequencies.
Note: The scanner defaults to Off.
Setting System Attenuation
(Trunked Systems Only)
(Trunked Systems Only)
program system
E
Select the system
E
Set ATTENUATION
E
This setting controls whether the attenuator will be on or
off for the current system. Select your setting then press E.
off for the current system. Select your setting then press E.
Off
- the attenuator is off.
On
- system frequencies are attenuated by about 18 dB.
Notes:
• Turn on this setting if you are near strong signal
sources. Attenuation can help reduce interference
and desensitization that strong signals create.
and desensitization that strong signals create.
• You can also turn this setting on or off by holding on a
trunked system, then pressing
+ E.
Menu
Menu
Func
BC246T Paper OM 062405.fm Page 70 Tuesday, June 28, 2005 10:12 AM