Symbol Technologies DS 3408 User Manual
DS 3408 Product Reference Guide
10-4
1.
Attach the modular connector of the Wand Emulation interface cable to cable interface port on the digital scanner (see
2.
Connect the other end of the Wand Emulation interface cable to the wand port on the mobile computer or controller.
3.
Select the Wand Emulation host type by scanning the appropriate bar code from
.
4.
To modify any other parameter options, scan the appropriate bar codes in this chapter.
Connect the digital scanner to 5 volt decoders only. Connecting the digital scanner to a 12 volt
decoder can damage the digital scanner and invalidate the warranty.
decoder can damage the digital scanner and invalidate the warranty.
Wand Emulation Parameter Defaults
lists the defaults for Wand Emulation host types. To change any option, scan the appropriate bar code(s) provided in
.
See
for all user preferences, hosts, symbologies, and
miscellaneous default parameters.
Table 10-1. Wand Emulation Default Table
Parameter
Default
Page Number
Wand Emulation Host Parameters
Wand Emulation Host Types
Symbol OmniLink Interface
Controller
Controller
Leading Margin
80 msec
Polarity
Bar High/Margin Low
Ignore Unknown Characters
Ignore
Convert All Bar Codes to Code 39
Disable
Convert Code 39 to Full ASCII
Disable
WARNING
Note