Symbol Technologies DS 3408 User Manual

13-32

The length of a code refers to the number of characters (i.e., human readable characters), including check digit(s) the code contains. 
Set lengths for Code 11 to any length, one or two discrete lengths, or lengths within a specific range.

•

One Discrete Length - Select this option to decode only Code 11 symbols containing a selected length. Select the length 
using the numeric bar codes in 

. For example, to decode only Code 11 symbols with 14 

characters, scan Code 11 - One Discrete Length, then scan 1 followed by 4. To correct an error or to change the 
selection, scan Cancel on page 

•

Two Discrete Lengths - Select this option to decode only Code 11 symbols containing either of two selected lengths. 
Select lengths using the numeric bar codes in 

. For example, to decode only those Code 11 

symbols containing either 2 or 14 characters, select Code 11 - Two Discrete Lengths, then scan 0, 2, 1, and then 4. 
To correct an error or to change the selection, scan Cancel on page 

.

•

Length Within Range - Select this option to decode a Code 11 symbol with a specific length range. Select lengths 
using numeric bar codes in 

For example, to decode Code 11 symbols containing 

between 4 and 12 characters, first scan Code 11 - Length Within Range. Then scan 0, 4, 1, and 2 (single digit numbers 
must always be preceded by a leading zero). To correct an error or change the selection, scan Cancel on page 

•

Any Length - Scan this option to decode Code 11 symbols containing any number of characters within the digital scanner 
capability.