Symbol Technologies DS 3408 User Manual
DS 3408 Product Reference Guide
15-8
Special Commands
Pause Duration
This parameter along with the Send Pause parameter on page 15-31 allows a pause to be inserted in the data transmission. Pauses
are set by scanning a two-digit number (i.e., two bar codes), and are measured in 0.1 second intervals. For example, scanning bar
codes “0” and “1” inserts a 0.1 second pause; “0” and “5” inserts a 0.5 second delay. See
are set by scanning a two-digit number (i.e., two bar codes), and are measured in 0.1 second intervals. For example, scanning bar
codes “0” and “1” inserts a 0.1 second pause; “0” and “5” inserts a 0.5 second delay. See
. To correct
an error or change a selection, scan
.
Pause Duration
Begin New Rule
Scan this bar code to start entering a new rule
.
Begin New Rule
Save Rule
Scan this bar code to save the rule.
Save Rule