Symbol Technologies DS 3408 User Manual

2-8

The optional Intellistand adds greater flexibility to scanning operation. When the digital scanner is seated in the stand’s “cup,” the 
digital scanner’s built-in sensor places the digital scanner in hands-free mode. When the digital scanner is removed from the stand 
it operates in its normal hand-held mode.

To operate the digital scanner in the IntelliStand:

1.

Ensure the digital scanner is properly connected to the host (see the appropriate host chapter for information on host 
connections).

2.

Insert the digital scanner in the Intellistand by placing the front of the digital scanner into the stand’s “cup” (see 

). 

3.

Use the Intellistand’s adjustment knobs to adjust the height and angle of the digital scanner.

4.

Center the symbol in the aiming pattern. The entire symbol must be within the brackets.

5.

Upon successful decode, the digital scanner beeps and the LED turns green. For more information on beeper and LED 
definitions, see 

 and 

.

Scanner “Cup”

Adjust height of 
IntelliStand

Adjust angle of 
scanner “cup”