Savin 2212 User Manual
Size Magnification
79
2
Size Magnification
This function calculates an enlarge-
ment or reduction ratio based upon
the lengths of the original and copy.
ment or reduction ratio based upon
the lengths of the original and copy.
Preparation
Measure and specify the lengths of
the original and copy by compar-
ing "A" with "a."
the original and copy by compar-
ing "A" with "a."
Limitation
❒ If the calculated ratio is over the
maximum or under the minimum
ratio, it is adjusted to within the
available range of ratios automati-
cally. However, with some ratios,
parts of the image might not be
copied or margins will appear on
copies.
ratio, it is adjusted to within the
available range of ratios automati-
cally. However, with some ratios,
parts of the image might not be
copied or margins will appear on
copies.
Note
❒ A ratio is selected in the range of 25
to 400% (25-200% when placing
originals in the document feeder).
originals in the document feeder).
AAAA
Press the [Reduce/Enlarge] key.
BBBB
Press the [Specifd. Ratio] key.
CCCC
Make sure that the [Specifd. Ratio]
key is highlighted.
key is highlighted.
DDDD
Enter the length of the original
with the number keys, and then
press the [#] key.
with the number keys, and then
press the [#] key.
Note
❒ You can enter sizes within the
following ranges.
❒ To change the length entered,
press the [Clear] or
{
{
{
{
Clear/Stop
}
}
}
}
key and enter the new length.
Amm
amm
Metric
version
version
1 – 999mm (in 1mm steps)
Inch
version
version
0.1" – 99.9" (in 0.1" steps)