PSC 2200VS User Manual

®

Ω

The green LED indicates scanner status as shown in the table below..

Scanner Active

a

(Normal Mode)

Scanner (Green) LED on steady and 
dim

The scanner is ready for operation. Scanning is 
immediately available.

Good Read 

Indication

Scanner (Green) LED - bright flash

Indicates a bar code has been read and decoded.

Program Mode
Indication

Scanner (Green) LED - Continuous 
flashing

Indicates the scanner is in Label Programming 
Mode. Cycle power to exit Programming Mode.

Sleep Mode 
Indication

Scanner (Green) LED flashes slowly

The scanner motor and/or laser have automati-
cally switched off and the unit has entered Sleep 
Mode due to extended inactivity.

Host Disabled

Scanner (Green) LED 1-second off, 1/
10-second on

Host has disabled scanning.

Field Replace-
able Unit (FRU) 
Warning (Error 
Mode)

Audible low tone 1 second. LED 
flashes continuously.

Serves notice that a fatal FRU failure has been 
detected. Call systems support for service.

FRU Indication 

Scanner (Green) LED flashes a 
coded sequence in concert with the 
speaker.

Occurs ONLY upon Volume/Tone button push fol-
lowing a FRU warning. Enables service techni-
cians to identify FRU failures.

a. Certain functions of the LED are selectable to be enabled or disabled. Your scanner may not be pro-

grammed to display all indications.