Radio Shack PRO-106 User Manual

 

 

o

  Note that the key presses for a CPU upgrade are different than for a DSP 

upgrade.  

3.  When the upgrade is complete, disconnect the USB cable from the scanner.   

4.  Turn the scanner off, hold down the PGM key, then turn the scanner on again. 

Confirm that the radio now reports the CPU version as 1.7.   

5.  Turn the radio off then on again to reset it.  

•  Ensure that the USB cable drivers are installed and that Windows recognizes the 

cable and has assigned a COM port number. 

•  Ensure that the correct COM port is set in the upgrader. 

•  Ensure that no other applications are running that access the same COM port. 

•  Repeat the upgrade process, making certain that the on-screen instructions of 

the upgrader are followed exactly. 

If the above suggestions do not work, try running the upgrade utility on a different 
computer. In some cases hidden applications can cause port conflicts. It is not always 
possible to see these hidden applications and disable them to eliminate the conflict.   

Visit your local RadioShack store for support for this firmware upgrade and any other 
product issues.