Barco MXRT2400 User Manual
16
Display Controller
Dual-Link dongle
The Dual-Link dongle also converts DisplayPort input signals to DVI
output signals. However, unlike the Single-Link dongle, the Dual-Link
dongle offers higher resolutions for both color and grayscale displays.
output signals. However, unlike the Single-Link dongle, the Dual-Link
dongle offers higher resolutions for both color and grayscale displays.
DisplayPort to Dual-Link DVI Dongle - enables full refresh rate support
on color display resolutions over 1920x1200, and grayscale display
resolutions over 2048x2560. Must be ordered separately.
on color display resolutions over 1920x1200, and grayscale display
resolutions over 2048x2560. Must be ordered separately.
The Dual-Link Dongle is only needed with graphics cards that have an
active DisplayPort output, such as the MXRT-7300. Use the following
steps to install the dongle:
active DisplayPort output, such as the MXRT-7300. Use the following
steps to install the dongle:
1
Connect the DisplayPort end of the connector to the graphics card.
2
Plug in a Dual-Link DVI cable from the display into the DVI adapter
of the dongle.
of the dongle.
3
Connect the built-in USB power cable on the dongle to a
workstation USB port.
workstation USB port.
A Dual-Link DVI cable must be used to connect your display’s
DVI connector with the DVI connector on the Dual-Link dongle.
DVI connector with the DVI connector on the Dual-Link dongle.
The Dual-Link dongle should be ordered separately.