Barco MXRT2400 User Manual
Display Controller
27
the installation does not start, in the "auto play" window, click Run
setup.exe.
setup.exe.
3
If a previous installation of MXRT driver is present, the installation
wizard will detect it and guide you through the uninstallation
process if necessary.
wizard will detect it and guide you through the uninstallation
process if necessary.
4
By default, choose the Express Install option. The Master installer
will install the following components:
will install the following components:
•
BMSE
•
QAWebAgent
•
Graphics Driver
5
Click "Yes" to accept driver's License Agreement, and then "Next"
to continue.
to continue.
6
During installation, there may be a fair amount of display flashing,
and the install wizard window may appear on different displays.
This is an expected behavior.
and the install wizard window may appear on different displays.
This is an expected behavior.
7
When the installation of all components has completed, the
automatic reboot window will be displayed. Allow the system to
reboot.
automatic reboot window will be displayed. Allow the system to
reboot.
To verify that the driver was installed, go to the Windows Control
Panel, select System, select Device Manager, then select Display
Panel, select System, select Device Manager, then select Display
In a mixed board configuration (MXRT1150/2150 and
MXRT5200/7300), two separate drivers will be installed..
The master Install program will make two passes through
the driver installation process (i.e. License Agreement,
Verify Installation Options, etc.).
MXRT5200/7300), two separate drivers will be installed..
The master Install program will make two passes through
the driver installation process (i.e. License Agreement,
Verify Installation Options, etc.).