Intel 253668-032US User Manual
9-36 Vol. 3
PROCESSOR MANAGEMENT AND INITIALIZATION
9.11 MICROCODE
UPDATE
FACILITIES
The Pentium 4, Intel Xeon, and P6 family processors have the capability to correct
errata by loading an Intel-supplied data block into the processor. The data block is
called a microcode update. This section describes the mechanisms the BIOS needs to
provide in order to use this feature during system initialization. It also describes a
specification that permits the incorporation of future updates into a system BIOS.
Intel considers the release of a microcode update for a silicon revision to be the
equivalent of a processor stepping and completes a full-stepping level validation for
releases of microcode updates.
A microcode update is used to correct errata in the processor. The BIOS, which has
an update loader, is responsible for loading the update on processors during system
initialization (Figure 9-7). There are two steps to this process: the first is to incorpo-
rate the necessary update data blocks into the BIOS; the second is to load update
data blocks into the processor.
errata by loading an Intel-supplied data block into the processor. The data block is
called a microcode update. This section describes the mechanisms the BIOS needs to
provide in order to use this feature during system initialization. It also describes a
specification that permits the incorporation of future updates into a system BIOS.
Intel considers the release of a microcode update for a silicon revision to be the
equivalent of a processor stepping and completes a full-stepping level validation for
releases of microcode updates.
A microcode update is used to correct errata in the processor. The BIOS, which has
an update loader, is responsible for loading the update on processors during system
initialization (Figure 9-7). There are two steps to this process: the first is to incorpo-
rate the necessary update data blocks into the BIOS; the second is to load update
data blocks into the processor.
RAM start
RAM_START equ 400H
memory (reserve = (0..3FFFH))
RAM_START is used as
the ram destination for
moving the tables. It must
be excluded from the
application's segment
area.
Location of the
application TSS
in the GDT
TSS_INDEX EQU 10
TABLE GDT(
ENTRY = (10:
PROTECTED_MODE_
TASK))
Put the descriptor of the
application TSS in GDT
entry 10.
EPROM size
and location
size and location of the
initialization code
SEGMENT startup.code (base =
0FFFF0000H) ...memory
(RANGE(
ROM_AREA = ROM(x..y))
Initialization code size
must be less than 64K
and resides at upper most
64K of the 4-GByte
memory space.
Table 9-5. Relationship Between BLD Item and ASM Source File (Contd.)
Item
ASM386 and
Startup.A58
BLD386 Controls
and BLD file
Effect