IBM 5.5 User Manual

There is one further Oracle requirement. The default tablespace of the Oracle connection 
created by the primary server must be the same as the one created by the secondary. This 
will be the case if both servers are using the same precisiontn.xml file. 

The primary and secondary instances of the Netcool/Precision TN server should run on 
different machines. It is recommended that the two installations are identical.

The minimum requirement is for the precisiontn.xml and 

oracle_config.xml

 files to be identical between the two instances.

This section describes how to start and stop failover. 

To start the servers: 

1.

Start the database. See your Oracle documentation for information about starting the 
database you are using. 

2.

Start the servers using the command: 

./precisiontn

The first instance you start will come up as the primary server. Start a second instance 
of Netcool/Precision TN as your secondary server.

3.

Start Network Pilot. To monitor the primary server, follow the instructions in "Step 3 – 
starting Network Pilot" on page 32 to start Network Pilot. You cannot monitor the 
secondary server. 

To force the instances of the server to switch state, you must shut down the primary server. 
To shut it down gracefully from Network Pilot, click the Shutdown button on the Admin 
tab. The secondary will detect that it has been shut down and become the primary. After 
the initial secondary has finished the switchover, you can start another secondary instance 
from the command line, as described above.

Although it is unusual to go from running servers in a failover configuration to running just 
one server, you might want to do this at some point. To stop the servers: 

1.

Shut down the primary server gracefully from Network Pilot by clicking the 
Shutdown

 button on the Admin tab. 

2.

Because you cannot use Network Pilot with the secondary server, you can shut down 
the secondary server manually using the kill command.