HP (Hewlett-Packard) DV6 User Manual
Solid-state drive
Description
Spare part number
160-GB solid-state drive for use on all computer models
682098-001
32-GB solid-state drive for use only on computer models equipped with an Intel processor
682099-001
Before removing the solid-state drive, follow these steps:
1.
Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
the computer on, and then shut it down through the operating system.
2.
Disconnect the power from the computer by unplugging the power cord from the computer.
3.
Disconnect all external devices from the computer.
4.
Remove the battery (see
), and then remove the following components:
a.
b.
Optical drive (see
)
c.
Keyboard (see
d.
Top cover (see
Remove the solid-state drive:
1.
Remove the Phillips PM2.0×3.5 screw (1) that secures the solid-state drive to the system board.
(The solid-state drive tilts up.)
(The solid-state drive tilts up.)
70
Chapter 4 Removal and replacement procedures