Soyo SY-7IZB+ User Manual

2. Choose [SUPERVISOR PASSWORD] from the Main Menu and

press 

[Enter]

. The following prompt appear:

Warning: If you forget or lose the password, the only way
to access the system is to set jumper JP5 to clear the
CMOS RAM. All setup information is lost and you must run
the BIOS setup program again.

Note: If you do not wish to use the password function,
press [Enter] directly and the following message appears:

3. Enter your new password and press [Enter]. The following

message appears, prompting to confirm the new password:

4. Re-enter your password and then press [Enter] to exit to the

Main Menu.

Enter Password:

Password Disabled!!

Confirm Password: