Sony DASK-S704 User Manual
30
(GB)
Reproducing the Reverb Program
To reproduce the reverb program which you sampled using the DASK-
S704 and stored in the Memory Stick, use the DRE-S777 or DASK-S701/
S702/S703 sampling reverb software (Version 2.0).
S704 and stored in the Memory Stick, use the DRE-S777 or DASK-S701/
S702/S703 sampling reverb software (Version 2.0).
To start the sampling reverb software from “GoToReverb” on the DASK-S704
1
On the SETUP display of the DASK-S704, highlight “GoToReverb.”
SETUP
GoToReverb
:
Fs/Period
:Fs/5.5sec
Repeat
:16
File
:
Rename MS
:xxxxxxxx
Enter
2
Press the F4 key.
“Go To Reverb CDROM?” is displayed.
“Go To Reverb CDROM?” is displayed.
SETUP
GoToReverb
:
Fs/Period
:Fs-5.5sec
Repeat
:16
File
:
Rename MS
:xxxxxxxx
Enter
Go To Reverb CDROM?
Exit
3
Press the F4 key.
The following display appears, and the CD tray opens.
The F4 key flashes.
The following display appears, and the CD tray opens.
The F4 key flashes.
SETUP
GoToReverb
:
Fs/Period
:Fs-5.5sec
Repeat
:16
File
:
Rename MS
:xxxxxxxx
Please change CDROM/MS
to DRE-S777 Ver 2.0 or
DASK-S70x series Ver 2.0
to DRE-S777 Ver 2.0 or
DASK-S70x series Ver 2.0
Close CDROM
4
Change the CD-ROM to the DRE-S777 or DASK-S701/S702/S703,
and the Memory Stick to the one that holds the correct licence code.
Then press the F4 key.
The CD tray closes and the sampling reverb software starts.
and the Memory Stick to the one that holds the correct licence code.
Then press the F4 key.
The CD tray closes and the sampling reverb software starts.
5
Change the Memory Stick and select the reverb program, following the
instructions in “Selecting a reverb program stored in another CD-ROM
or another Memory Stick/Selecting the Reverb Program/REVERB
Display” of the DRE-S777 Operating Instructions.
instructions in “Selecting a reverb program stored in another CD-ROM
or another Memory Stick/Selecting the Reverb Program/REVERB
Display” of the DRE-S777 Operating Instructions.
Note
This function does not work with the DRE-S777 or DASK-S701 CD-ROM
Version 1.0.
Version 1.0.
To start the sampling reverb software by turning on the power of the DRE-S777
Turn off the power of the DRE-S777, change the CD-ROM to the DRE-
S777 or DASK-S701/S702/S703, and the Memory Stick to the one that
holds the correct licence code. Then turn on the power again.
Then change the Memory Stick and select the reverb program, following
the instructions in “Selecting a reverb program stored in another CD-ROM
or another Memory Stick/Selecting the Reverb Program/REVERB
Display” of the DRE-S777 Operating Instructions.
S777 or DASK-S701/S702/S703, and the Memory Stick to the one that
holds the correct licence code. Then turn on the power again.
Then change the Memory Stick and select the reverb program, following
the instructions in “Selecting a reverb program stored in another CD-ROM
or another Memory Stick/Selecting the Reverb Program/REVERB
Display” of the DRE-S777 Operating Instructions.