Panasonic AWHE60SN User Manual

Page of 114
22
Preset memories
(continued)
When the AW‑RP555 is connected:
Up to 10 settings can be registered and called.
The [1] to [10] buttons of [PRESET] correspond to the unit’s 
preset memories No.1 to No.10.
p
Registering the settings in the preset memories
1
Display the picture to be shot on the monitor.
Operate the [PAN/TILT] lever and [ZOOM] lever to 
determine the camera angle.
Adjust the focus, iris, gain and white balance if they need 
to be adjusted.
2
Hold down the [MEMORY] button.
The buttons among the [1] to [10] buttons of [PRESET] 
in which settings can be registered now start blinking in 
sequence.
3
With the [MEMORY] button still held down, 
press the button of the preset memory number 
in which the setting is to be registered.
p
Calling the settings of the preset memories
1
Press the button among the [1] to [10] buttons 
of [PRESET] in which the desired setting was 
registered.
When the AW‑RP50 is connected:
Refer to the Operating Instructions of the controller.