Panasonic AWHE60HE User Manual

Page of 114
55
Controls and settings from web screen
With a personal computer connected to the unit, it is possible 
to view the camera’s IP videos or select various settings from 
the web browser screen.
The LAN crossover cable is used when connecting a 
personal computer directly to the unit’s LAN connector for IP 
control, and the LAN straight cable is used when making the 
connection through a switching hub.
Select an IP address for the personal computer within the 
private address range while ensuring that it is different from 
the address of the unit.
Set the subnet mask to the same address as the unit.
p
 If you need to change the IP address and subnet 
mask, be sure to ask your dealer to make these 
changes for you.
Unit’s IP address and subnet mask (factory settings)
IP address: 
192.168.0.10
Subnet mask:  255.255.255.0
Range of private addresses: 
   
192.168.0.0 to 192.168.0.255
p
 If the controller and web browser are being used at the 
same time, the content selected using the controller 
may not be reflected on the web browser display. 
When using both the controller and web browser, 
be absolutely sure to check the settings using the 
controller or camera menu.
Notes
For details of the required personal computer 
environment, refer to page 4.
p
 Some functions on the web setting screen can be used 
only from a personal computer which is running Windows. 
(They cannot be used from a personal computer which is 
running Mac OS X.) 
Functions which can be used by Windows only are 
indicated using the 
 mark.
p
 The “Network Camera View4” plug-in viewer software 
must have already been installed in order to display 
the unit’s IP videos using a personal computer which is 
running Windows. 
(This is not required for a personal computer which is 
running MAC OS X.) 
For further details, refer to “Plug-in viewer software 
(Network Camera View4)” (page 41 in the <Basics>).