Panasonic AWHE60SE User Manual

Page of 114
47
Camera menu items
(continued)
p
wOutput screen
     Output 
 Format              1080i
 Down CONV. Mode LetterBox
 HDMI Color       YCbCr422
 Return
Format 
[1080/59.94p, 1080/59.94i, 720/59.94p, 480/59.94p, 
480/59.94i, 1080/29.97PsF, 1080/50p, 1080/50i, 
720/50p, 576/50p, 576/50i, 1080/25PsF]
The video format is changed on this screen.
The formats of the images which can be output differ 
between the AW-HE60H and AW-HE60S.
For details on how to change the format, refer to 
“Changing the format” (page 48).
Down CONV. Mode
[Squeeze, SideCut, LetterBox]
The down-conversion mode is selected here.
Squeeze
When the 4:3 aspect ratio has been set 
for the monitor screen, the images are 
squeezed horizontally and extended 
vertically changing the view of the angle.
SideCut
With the vertical height serving as the 
reference, the parts which extend beyond 
this at the two sides are cropped changing 
the view of the angle.
LetterBox
With the horizontal width serving as the 
reference, black bands are added at the 
top and bottom changing the view of the 
angle.
p
  When output is selected for the color bar, the mode is fixed 
to Squeeze. 
If “SideCut” or “LetterBox” has been selected, the images 
will not appear for a few seconds when the color bar 
display is set to ON or OFF.
HDMI Color (AW‑HE60H only)
[RGB‑NOR, RGB‑ENH, YCbCr422, YCbCr444]
Set here is the HDMI color output.
   When an HDMI monitor is used, use “YCbCr422” under 
normal circumstances.
   In cases where, for instance, HDMI (RGB) signals are 
converted and output to a DVI monitor, the settings 
required will differ depending on the color gradation 
supported by the monitor.
RGB-NOR The RGB output signals are output in the 
16 to 235 range.
RGB-ENH The RGB output signals are output in the 
0 to 255 range.
   If the black parts of the images appear overexposed 
when “RGB-NOR” has been selected, use the  
“RGB-ENH” setting instead.
   Conversely, if the images are displayed with a loss of 
dark detail when “RGB-ENH” has been selected, use 
the “RGB-NOR” setting instead.
p
 If an HDMI Color setting which is not supported by 
the monitor has been specified, the HDMI Color 
setting may be changed automatically.  
(The menu display will remain unchanged.)
Note
With the AW-HE60S, this item cannot be selected.
Return
Use this to return to the previous menu.