Pelco System 9760 User Manual
84
C1572M (9/05)
REAR VIEW
Figure 39. CM9700-CC1 Rear View
•
Printer port: Female DB25 connector (reserved for future use)
•
Physical ports 1-2 and 5-36:
–
COM 1 (port 1) and COM 2 (port 2): Male DB9 connectors for RS-232 serial communication. COM 1 is configured at the factory for
connection to the CM9700-MGR PC.
connection to the CM9700-MGR PC.
–
Serial communication (SERCOM) ports 5-36: Female RJ-45 connectors for RS-422 communication to system devices such as
CM9760-MXBs and CM9760-KBDs.
CM9760-MXBs and CM9760-KBDs.
The default configuration of the CM9700-CC1 contains 16 SERCOM ports (ports 5-20). The ports are provided by two CM9700-SER
serial communication cards installed on the CM9700-CC1 motherboard. Each card provides 8 SERCOM ports. Depending on system
requirements, up to two additional CM9700-SER cards can be ordered, providing up to 16 additional ports (ports 21-36). If four
CM9700-SER cards are installed, the total number of SERCOM ports is 32. For information about adding or replacing CM9700-SER
cards in an existing system, refer to Installing or Replacing a CM9700-SER Card in the CM9700-CC1 Component Installation or
Replacement section.
serial communication cards installed on the CM9700-CC1 motherboard. Each card provides 8 SERCOM ports. Depending on system
requirements, up to two additional CM9700-SER cards can be ordered, providing up to 16 additional ports (ports 21-36). If four
CM9700-SER cards are installed, the total number of SERCOM ports is 32. For information about adding or replacing CM9700-SER
cards in an existing system, refer to Installing or Replacing a CM9700-SER Card in the CM9700-CC1 Component Installation or
Replacement section.
Note that a maximum of 120 SERCOM ports can be achieved with a configuration of 3 CM9700-SER cards (8 ports each) and 3
CM9700-SER-32 port expander assemblies (32 ports each). For information about CM9700-SER-32 port expander assemblies, refer to
the CM9700-SER-32 Port Expander Installation/Operation manual.
CM9700-SER-32 port expander assemblies (32 ports each). For information about CM9700-SER-32 port expander assemblies, refer to
the CM9700-SER-32 Port Expander Installation/Operation manual.
•
VGA port: Female DB15 connector that connects to a VGA monitor, which allows you to view system diagnostics. For additional information
about system diagnostics, refer to the System Diagnostics section.
about system diagnostics, refer to the System Diagnostics section.
•
AT-compatible keyboard port: 5-pin mini DIN connector that connects to the supplied PS/2-to-AT keyboard adapter for connection to the
supplied PS/2 keyboard.
supplied PS/2 keyboard.
•
AC power input connector: Three-prong connector that connects to the supplied power cord. The acceptable power range is 120 VAC to 230
VAC. The power supply automatically adjusts to the proper voltage range.
VAC. The power supply automatically adjusts to the proper voltage range.
•
Power switch: Rocker-type switch used to power the CM9700-CC1 on or off.
NOTE: Ports 3 and 4 are not present on the CM9700-CC1.
NOTE: An AT-compatible keyboard port also exists on the front of the CM9700-CC1 behind the front door (refer to Figure 38). Both keyboard
ports cannot be used at the same time.
ports cannot be used at the same time.
5
6
7
8
10
9
11
12
19
18
17
16
15
14
13
21
22
23
24
25
26
27
28
20
29
30
31
32
33
34
35
36
PRINTER COM1 COM2
PRINTER
PORT*
POWER
INPUT
POWER
SWITCH
AT-COMPATIBLE
KEYBOARD PORT
*RESERVED FOR FUTURE USE
COM 1
PORT
(RS-232)
COM 2
PORT
(RS-232)
VGA
PORT
SERCOM
PORTS
(RS-422)