Polycom DOC2066F User Manual
Chapter 2 - Defining Standard Audio Only Conferences and Reservations
2-6
MCU Configuration and Audio Only Conferences
The functional modules (cards) installed in the MCU determine what kind of
conference can run on the MCU.
conference can run on the MCU.
The Audio+ card is required to run IVR-enabled conferences and Entry
Queue and Audio Only conferences. If no such card is available, an error
message is displayed when defining any of these conferences.
Queue and Audio Only conferences. If no such card is available, an error
message is displayed when defining any of these conferences.
T1-CAS participants are supported only with the Audio+12/24, Audio+24/48
and Audio+48/96 cards.
and Audio+48/96 cards.
It is not possible to mix an ISDN Network Service and a T1-CAS Network
Service on the same Net-2/Net-4/Net-8 Network Interface module. Therefore,
to run both ISDN and T1-CAS conferences simultaneously, you must install
two separate the Net-2/Net-4/Net-8 cards. IP or IP+ cards are required to run
conferences that include VoIP participants.
Service on the same Net-2/Net-4/Net-8 Network Interface module. Therefore,
to run both ISDN and T1-CAS conferences simultaneously, you must install
two separate the Net-2/Net-4/Net-8 cards. IP or IP+ cards are required to run
conferences that include VoIP participants.
IP+ cards from version 4.23 or higher are required for conferences that
include SIP participants. IP (12 or 24) cards are sufficient for H.323-only
conferences.
include SIP participants. IP (12 or 24) cards are sufficient for H.323-only
conferences.
The VTX 1000 connection is supported with the Audio+12/24, Audio+24/48
and Audio+48/96 cards and the MGC-25.
and Audio+48/96 cards and the MGC-25.