Panasonic HDC-SD40 User Manual

Motion pictures or still pictures recorded with this unit can be copied from a built-in memory to 
an SD card inserted in this unit.

∫ Check the used space of the SD card

It is possible to check the used space of the SD card by [MEDIA STATUS] (l 34).
≥ Depending on the media condition, some remaining capacity of the SD card may not be 

used.

≥ If the remaining capacity on a single SD card is not enough, you can copy to multiple SD 

cards following the instruction on the screen. In this case, the last scene copied to an SD 
card is automatically divided to fit the space on the SD card.

≥ If you divide the scenes (

l 60), and copy by scene selection, it is possible to copy 

matching the remaining capacity of the SD card, or only the necessary parts.

≥ If there is not much remaining capacity in the SD card, a confirmation message asking to 

copy after deleting all data on the SD card is displayed. Be aware that deleted data cannot 
be restored.

≥ Use a sufficiently charged battery or the AC adaptor.

≥ Select 

 and press the ENTER button to return to the previous screen.

≥ (When [SELECT SCENES] is selected)

When you press the ENTER button, the scene/still picture is selected and 

indication 

appears on the thumbnail. Press the ENTER button again to cancell the operation.

≥ (When [SELECT DATE] is selected)

When you press the ENTER button, a date is selected and surrounded by red. Press the 
ENTER button again to cancel the operation.

≥ Up to 99 scenes/still pictures or 99 dates can be set in succession.
≥ If 2 or more SD cards are necessary to copy, change the card following the instructions on 

the screen.

≥ The thumbnail view of the copy destination is indicated.

Copy/Dubbing