OmniTek 2.3 User Manual
Page 88
OmniTek XR User Guide, Software Release 2.3
Alternatively, the display of these errors can be cycled through
the possible options by clicking the Toggle type button at the
bottom of the Video Status display.
the possible options by clicking the Toggle type button at the
bottom of the Video Status display.
There is also the option of displaying ‘timelines’ indicating the
rate at which errors are occurring (see page 84).
rate at which errors are occurring (see page 84).
Resetting Errors
The error counters within the Video Status display can be reset either individually or as a
whole group.
whole group.
To reset a particular error counter, either right-click on the error count and take the option
to Reset error counter in the menu that appears, or take the option to Reset error
counters from the Options menu then select the error type that you want to reset from
the submenu that appears.
to Reset error counter in the menu that appears, or take the option to Reset error
counters from the Options menu then select the error type that you want to reset from
the submenu that appears.
To reset all the error counters, either click on the Reset Error button on the bottom bar of
the display or select Reset error counters from the Options menu and take the All
option from the submenu that appears. Alternatively, if you want a simultaneous reset of
this status with the Audio status and the Error logging, take the Reset Status and
Logging option from the Analyzer menu of the main application (see page 18).
the display or select Reset error counters from the Options menu and take the All
option from the submenu that appears. Alternatively, if you want a simultaneous reset of
this status with the Audio status and the Error logging, take the Reset Status and
Logging option from the Analyzer menu of the main application (see page 18).
The numbers displayed in the Status window each represent the error count since the
error counter was last reset.
error counter was last reset.
Options menu
The Options menu in the Video Status window includes the following options:
Flat View
Ticking this option selects the alternative ‘flat’ status display (see page 84).
Configure Timeline
This option allows you both to opt to display ‘timelines’ indicating the rate at
which different type of errors are occurring and to set the parameters of that
those timelines (as shown the following dialogue). See page 84.
which different type of errors are occurring and to set the parameters of that
those timelines (as shown the following dialogue). See page 84.
Configure Filter
Calls up the dialogue through which items for display and/or logging are selected (see
page 119).
page 119).
Look & Feel
Calls up the Look & Feel dialogue used to set display parameters across the whole
application (see page 59).
application (see page 59).
Reset options
These options reset different aspects of the Video Status display.
Enable columns
This option displays a dialogue through which you can select which details are displayed
in the Video Status window.
in the Video Status window.