Panasonic WJ-GXE500E Operating Guide
31
*3
• When "On" is selected, the SD memory card error LED will light when data cannot be saved on the SD
memory card.
*4
• Select the interval to refresh the alarm occurrence indication button, the [AUX] buttons and the SD record-
ing status indicator on the "Live" page.
*5
• Depending on the network environment, notification may not be provided in real time.
*6
• The following port numbers are unavailable since they are already in use.
20, 21, 23, 25, 42, 53, 67, 68, 69, 80, 110, 123, 161, 162, 995, 10669, 10670
[SD memory card] tab
Refer to page 28 for general information about this tab. Refer to page 12 for how to operate.
Setup items
Setting values (Underlined: default)
SD memory card
*1 *2
SD memory card
Use/Not use
Remaining capacity notification *3
50%/20%/10%/5%/2%
Save trigger *4
FTP error/Alarm input/Manual
Ch1/Ch2/Ch3/Ch4
Ch1/Ch2/Ch3/Ch4
Overwrite *5
On/Off
File name *6
(Default: None (blank))
Image saving interval/
Number of images to be
saved *7
Number of images to be
saved *7
Image saving
interval
interval
NTSC model:
0.1fps/0.2fps/0.33fps/0.5fps/1fps
PAL model:
0.08fps/0.17fps/0.28fps/0.42fps/1fps
0.1fps/0.2fps/0.33fps/0.5fps/1fps
PAL model:
0.08fps/0.17fps/0.28fps/0.42fps/1fps
Number of imag-
es to be saved
es to be saved
10pics/20pics/30pics/50pics/100pics/
200pics/300pics/500pics/1000pics/
2000pics/3000pics
200pics/300pics/500pics/1000pics/
2000pics/3000pics
Image capture size *8
QVGA/VGA
SD memory card infor-
mation
mation
Remaining capacity *9
Format
Format
*10
SD memory card images Access img.
*11 *12
Important:
*1
• When the image refresh interval is short, notification/recording timing or interval may become incorrect.
• Select "Not use" when operating without an SD memory card.
• Before removing the SD memory card from the unit, it is necessary to select "Not use" first.
• After inserting the SD memory card, it is necessary to select "Use" to use the SD memory card.
• When playing or downloading images saved on the SD memory card, it is necessary to select "On" for
• Select "Not use" when operating without an SD memory card.
• Before removing the SD memory card from the unit, it is necessary to select "Not use" first.
• After inserting the SD memory card, it is necessary to select "Use" to use the SD memory card.
• When playing or downloading images saved on the SD memory card, it is necessary to select "On" for
"Save logs" on the [Log] tab (☞ page 33) in advance.
• There are limited times to overwrite on an SD memory card. When having a high frequency of overwriting,
the lifetime of the SD memory card may become shorter.
• When the setting is changed between "Use" and "Not use" while another user is during operation, the
operation will be canceled.
• The data writing speed will go down after data are repeatedly written down on an SD memory card.