Panasonic WJ-GXE500E Operating Guide

67

 •  When "120 DPI" is not selected for "DPI setting",

they may not be displayed correctly.

    Click the [Settings] tab on the "Properties" window 

of "Screen" (in the control panel), and then click the 
[Advanced] button. Change the "DPI setting" to 
"Large size (120 DPI)".

 •  Images may be distorted when non-interlace sig-

nals, VCR (VTR) signals or signals not compliant 
with the standard in your locality are transmitted.

 •  Black lines may appear on the images displayed on

the screen when transmitting the VD2 synchroniza-
tion signals to cameras not supporting the VD2 syn-
chronization. Deactivate the VD2 synchronization.

 •  When the image capture mode is D1, due to the

standard of video signal, black bars appear instead 
of images on both edges of the screen. Black bar(s) 
also appear(s) even in the VGA mode when signals 
not compliant with the standard  in your locality are 
transmitted.

 •  Such a phenomenon occurs when the video fre-

quency of a camera and that of the unit are not fully 
synchronized.

 

  When using cameras supporting the VD2 syn-

chronization: 
Select "Int" for "Video sync", and then select 
"On" for "VD2".

 

  When using cameras not supporting the VD2 

synchronization: 
Select "Ch1" for "Video sync".

 With this setting, the unit operates synchronized

with the video frequency of the camera that sup-
plies the input signal to Ch1.

Images are not fit in the 
frames.

Displayed images are distort-
ed.

Black lines appear on the 
screen.

Black bars are displayed on 
both edges of the screen.

A picture is sometimes output 
twice or skipped.

–

–

42

–

42

Reference  

pages

Cause/solution

Symptom