GE JTP90 User Manual
5
Cabinet Width
30
”
(76.2 cm)
Recommended
Cutout Location
from Floor
Cutout Location
from Floor
21 5/8
”
(54.9 cm)
Cutout Depth
23 1/2
”
(59.7 cm) Min.
Cutout Width
28 1/2
”
(72.4 cm) Min.
28 5/8
”
(72.8 cm) Max.
Cutout Height
42 3/16
”
(107.2 cm) Min.
42 1/4
”
(107.3 cm) Max.
If the cabinet does not have a solid bottom,
two braces or runners must be installed
level with the bottom of the cutout to
support the weight of the oven. The
runners and braces must support
255 lbs (115 Kg).
two braces or runners must be installed
level with the bottom of the cutout to
support the weight of the oven. The
runners and braces must support
255 lbs (115 Kg).
Installation Instructions
Cutout for 30
″
(76.2 cm)
Built-In Oven
with Microwave models only
For JTP90, PT970 models only.
A
NOTE: If marks, blemishes or the
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
cutout opening are visible above the
installed oven, it may be necessary to
add wood shims under the runners and
front trim until the marks or opening
are covered.
C
L
2" x 4" or
EQUIVALENT
RUNNERS
EQUIVALENT
RUNNERS
21 5/8"
OVER CENTERLINE
OF CABINET
2” x 4”
(5 cm x 10 cm)
or equivalent
runners level
with bottom
of cutout
(5 cm x 10 cm)
or equivalent
runners level
with bottom
of cutout
Suitable
Bracing
to Support
Runners
Bracing
to Support
Runners
21 5/8
”
(54.9 cm)
Over Centerline
of Cabinet
CUTOUT
WIDTH
28 1/2" MIN.
28 5/8" MAX.
20"
28"
JUNCTION BOX
LOCATION
TO BOTTOM OF
JUNCTION BOX
*
CABINET
WIDTH
30"
ALLOW A MINIMUM
OF 21" FOR CLEARANCE
TO ADJACENT CORNERS,
DRAWERS, WALLS, ETC.
WHEN DOORS ARE OPENED.
ALLOW 11/16"
FOR OVERLAP
OF OVEN OVER
SIDE EDGES
OF CUTOUT.
OF CUTOUT.
ALLOW 1" FOR
OVERLAP
OF OVEN TOP
AND BOTTOM
AND BOTTOM
OF CUTOUT.
CUTOUT
HEIGHT
42 3/16" MIN.
42 1/4" MAX.
RECOMMENDED
CUTOUT
LOCATION
21 5/8"
21"
THE OPENING
BETWEEN INSIDE
WALLS MUST
BE A LEAST
28 1/2" WIDE
Junction Box
Location
Location
Cabinet
Width
30
”
(76.2 cm)
Allow minimum 1
”
(2.5 cm) for overlap
of oven top and 1
of oven top and 1
1
⁄
4
”
(3.2 cm) overlap of
bottom of cutout
bottom of cutout
Allow 11/16
”
(1.8 cm)
for overlap of oven
over side edges of
cutout
over side edges of
cutout
21
”
(53.3 cm)
Allow a minimum of 21
”
(53.3 cm)
for clearance
to adjacent corners,
drawers, walls, etc.
when door is
open
drawers, walls, etc.
when door is
open
Recommended cutout
location from floor
21 5/8
location from floor
21 5/8
”
(54.9 cm)
28
”
(71.1 cm) Min.
to Bottom of
Junction Box
Cutout
Height
42 3/16
Height
42 3/16
”
(107.2 cm)
Min.
42 1/4
Min.
42 1/4
”
(107.3 cm)
Max.
Max.
Cutout Width
28 1/2
”
(72.4 cm) Min.
28 5/8
”
(72.8 cm) Max.
Opening
between
inside walls
must be at
least 28 1/2
between
inside walls
must be at
least 28 1/2
”
(72.4 cm)
wide
wide
NOTE: If the cabinet does
not have a front frame and the
sides are less than 3/4
not have a front frame and the
sides are less than 3/4
”
(1.9 cm)
thick, shim both sides equally
to establish the cutout width.
to establish the cutout width.
20
”
(50.8 cm)
Max.