Mellerware 24850 User Manual

5) 

The toaster automatically switches off and raises the toast after the 
desired toast cycle is complete. The toasting process can be stopped 
at any time by pressing the cancel button. 

 

TOASTING FROZEN BREAD: place the bread into the bread slots and select desired 

browning setting. Press the bread rack lever down until it clicks into place and then press 

the “Frozen” button. 

REHEATING TOAST: Place the toast into the bread slots, press the bread rack lever down 

until it clicks into place and then press the “Reheat” button.   

 

1)  Always turn the power off, remove the plug from the power supply outlet and allow the 

product to cool completely before cleaning. 

2)  To remove any crumbs from the toaster, slide out the crumb tray from under the toaster, 

empty crumbs, wipe with a cloth and replace in the toaster before using it again. 

3)  Wipe the outside of the toaster with a slightly dampened cloth and polish with a soft dry 

cloth. DO NOT IMMERSE THE APPLIANCE IN WATER. 

4)  To clean the interior, turn the toaster upside down over the sink and shake crumbs free. 

DO NOT PLACE ANY METAL OR SHARP OBJECTS INSIDE YOUR TOASTER. 

 

PLEASE READ ALL INSTRUCTIONS BEFORE USE AND SAVE FOR FUTURE REFERENCE   

1) 

To protect against electrical shock, do not immerse any part of the 

appliance or cord into water or any other liquid. 

2) 

Close supervision is necessary when the appliance is used by, or near 

children. 

3) 

Do not leave the appliance unattended when not in use. 

4) 

Always use the appliance on a dry and stable work surface. 

5) 

Do not use this appliance outdoors. 

6) 

Always unplug the appliance from the power outlet socket when not in 

use and before cleaning. 

7) 

Do not operate the appliance if damaged, or after it malfunctions. If the 

appliance is damaged or malfunctions in any manner, return it to the 

approved service agent for service or repair to avoid any hazard. 

8) 

In the interest of safety, regular periodic close checks should be 

carried out on the supply cord to ensure no damage is evident. Should 

there be any signs that the cord is damaged, return the appliance to 

the approved service agent for service or repair. 

9) 

Do not let the cord hang over the edge of the table or work surface, or 

touch any hot surfaces. Allow the appliance to cool before wrapping 

cord in cord storage where applicable. 

10)  Care must be taken no to touch any hot surfaces, do not store or cover 

the appliance until it has fully cooled down. 

11)  Do not place the appliance on or near a hot gas or electric burner, in or 

where it could touch a heated oven or microwave oven. 

12)  Do not use harsh abrasives, caustic cleaners or oven cleaners when 

cleaning this appliance.