Ryobi HP24 User Manual

Your new screwdriver has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation,
and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

 Carefully read through this entire operator’s manual before using your new screwdriver.

Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your screwdriver properly and only
for what it is intended, you will enjoy years of safe, reliable service.

Thank you again for buying Ryobi products.

Collet

1/4 in. (6.4 mm)

Motor

2.4 Volt DC

Switch

Single Speed / Reversible

No Load Speed

150 RPM

Maximum Torque

35 lb.- in.

Charger Rating

120 Volts, 60 Hz, AC only

Charger Voltage

2.4 Volt

Charger Rate

3-6 Hours