ZyXEL Access Point G1000 v2 91-005-124001B User Manual

ZyXEL G-1000 v2 User’s Guide

Chapter 12 LAN Setup

103

The following table describes the fields in this menu.

Enable the roaming feature if you have two or more G-1000 v2s on the same subnet. Follow 
the steps below to allow roaming on your G-1000 v2. 

1 From the main menu, enter 3 to display Menu 3 – LAN Setup.

2 Enter 5 to display Menu 3.5 – Wireless LAN Setup.

                        Menu 3.5.1 - WLAN MAC Address Filter

                     Active= No
                     Filter Action= Allowed Association
------------------------------------------------------------------------------
   1=   00:00:00:00:00:00   13=   00:00:00:00:00:00   25=   00:00:00:00:00:00
   2=   00:00:00:00:00:00   14=   00:00:00:00:00:00   26=   00:00:00:00:00:00
   3=   00:00:00:00:00:00   15=   00:00:00:00:00:00   27=   00:00:00:00:00:00
   4=   00:00:00:00:00:00   16=   00:00:00:00:00:00   28=   00:00:00:00:00:00
   5=   00:00:00:00:00:00   17=   00:00:00:00:00:00   29=   00:00:00:00:00:00
   6=   00:00:00:00:00:00   18=   00:00:00:00:00:00   30=   00:00:00:00:00:00
   7=   00:00:00:00:00:00   19=   00:00:00:00:00:00   31=   00:00:00:00:00:00
   8=   00:00:00:00:00:00   20=   00:00:00:00:00:00   32=   00:00:00:00:00:00
   9=   00:00:00:00:00:00   21=   00:00:00:00:00:00
  10=   00:00:00:00:00:00   22=   00:00:00:00:00:00
  11=   00:00:00:00:00:00   23=   00:00:00:00:00:00
  12=   00:00:00:00:00:00   24=   00:00:00:00:00:00
------------------------------------------------------------------------------
                         Enter here to CONFIRM or ESC to CANCEL:

Table 43   Menu 3.5.1 WLAN MAC Address Filter

Active

To enable MAC address filtering, press [SPACE BAR] to select Yes and press [ENTER]. 

Filter Action 

Define the filter action for the list of MAC addresses in the MAC address filter table. 
To deny access to the G-1000 v2, press [SPACE BAR] to select Deny Association and 

press [ENTER]. MAC addresses not listed will be allowed to access the router.

The default action, Allowed Association, permits association with the G-1000 v2. MAC 

addresses not listed will be denied access to the router. 

MAC Address Filter

1..32

Enter the MAC addresses (in XX:XX:XX:XX:XX:XX format) of the client computers that are 

allowed or denied access to the G-1000 v2 in these address fields. 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to cancel” to 

save your configuration or press [ESC] to cancel and go back to the previous screen.