ZyXEL Access Point G1000 v2 91-005-124001B User Manual
Product codes
91-005-124001B
ZyXEL G-1000 v2 User’s Guide
Chapter 17 System Maintenance and Information
125
C
H A P T E R
17
System Maintenance and
Information
This chapter leads you through SMT menus 24.8 and 24.10.
17.1 Command Interpreter Mode
The Command Interpreter (CI) is a part of the main system firmware. The CI provides much of
the same functionality as the SMT, while adding some low-level setup and diagnostic
functions. Enter the CI from the SMT by selecting menu 24.8. See the included disk or the
zyxel.com web site for more detailed information on CI commands. Enter 8 from Menu 24 –
System Maintenance. A list of valid commands can be found by typing help or ? at the
the same functionality as the SMT, while adding some low-level setup and diagnostic
functions. Enter the CI from the SMT by selecting menu 24.8. See the included disk or the
zyxel.com web site for more detailed information on CI commands. Enter 8 from Menu 24 –
System Maintenance. A list of valid commands can be found by typing help or ? at the
command prompt. Type “exit” to return to the SMT main menu when finished.
Figure 74 Menu 24 System Maintenance
Figure 75 Valid CI Commands
Menu 24 - System Maintenance
1. System Status
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
2. System Information and Console Port Speed
3. Log and Trace
4. Diagnostic
5. Backup Configuration
6. Restore Configuration
7. Upload Firmware
8. Command Interpreter Mode
10. Time and Date Setting
11. Remote Management Setup
11. Remote Management Setup
Enter Menu Selection Number:
Copyright (c) 1994 - 2005 ZyXEL Communications Corp.
G-1000v2> ?
Valid commands are:
sys exit device ether
config wlan ip ppp
bridge cnm radius 8021x
G-1000v2>
G-1000v2> ?
Valid commands are:
sys exit device ether
config wlan ip ppp
bridge cnm radius 8021x
G-1000v2>