ZyXEL Access Point G1000 v2 91-005-124001B User Manual
Product codes
91-005-124001B
ZyXEL G-1000 v2 User’s Guide
58
Chapter 4 Wireless LAN
4.4.5 WPA(2) Authentication Screen
In order to configure and enable WPA(2) Authentication; click the Wireless LAN link under
Network to display the Wireless screen. Select WPA or WPA2 from the Security Mode list.
Network to display the Wireless screen. Select WPA or WPA2 from the Security Mode list.
Figure 19 Wireless: WPA(2)
Group Key Update
Timer (In
Seconds)
The Group Key Update Timer is the rate at which the AP (if using WPA(2)-PSK
key management) or RADIUS server (if using WPA(2) key management) sends a
new group key out to all clients. The re-keying process is the WPA(2) equivalent of
automatically changing the WEP key for an AP and all stations in a WLAN on a
periodic basis. Setting of the Group Key Update Timer is also supported in
WPA(2)-PSK mode. The G-1000 v2 default is 1800 seconds (30 minutes).
Apply
Click Apply to save your changes back to the G-1000 v2.
Reset
Click Reset to reload the previous configuration for this screen.
Table 19 Wireless: WPA(2)-PSK
LABEL
DESCRIPTION