Tandberg Data T40 User Manual

 

16  

Installing the Library 

Figure 10. StorageLibrary Mounted in a Rack, Rear View 

  

The figure above gives a rear-end view of the StorageLibrary mounted in a rack. The two screws on 
each side connect the left and right rail assemblies to the rack. 

Installing the Library 

After mounting, you must connect the cables to the library. Two sets of cabling instructions are 
available: 

 

For libraries with SCSI tape drives 

 

For libraries with Fibre Channel tape drives 

For instructions on cabling a library with SCSI tape drives, see 

Connecting Library Cables (SCSI)

. 

For instructions on cabling a library with Fibre Channel tape drives, see 

Connecting Library Cables

 

(Fibre Channel)

. 

If your library includes both SCSI and Fibre Channel tape drives, cable the tape drive following the 
appropriate instructions for that tape drive type. 

Connecting Library Cables (SCSI)  

Use this procedure if you are installing a library that includes SCSI tape drives.  

Figure 11. StorageLibrary Cabling (SCSI)