Tandberg Data T40 User Manual
44
Configuring the Library
Low - An error has occurred in the library, but the library is not in danger of failing. E-mail
accounts configured with a Low filter setting receive notification of all priority levels of RAS tickets
that the library produces.
accounts configured with a Low filter setting receive notification of all priority levels of RAS tickets
that the library produces.
Medium - The library is not in immediate danger of failing, but current problems could lead to a
failure in the future. E-mail accounts configured with a Medium filter setting receive notification of
all Priority 1 and Priority 2 RAS tickets that the library produces.
failure in the future. E-mail accounts configured with a Medium filter setting receive notification of
all Priority 1 and Priority 2 RAS tickets that the library produces.
High - The library has failed or is in immediate danger of failing. A resolution must be found
immediately. E-mail accounts configured with a High filter setting only receive notification of
Priority 1 RAS tickets that the library produces.
immediately. E-mail accounts configured with a High filter setting only receive notification of
Priority 1 RAS tickets that the library produces.
E-mail notification can only be configured from the RMI.
You need to complete the following steps to configure e-mail Event Notification:
1 Enable or disable the e-mail notification feature.
2 Enter the receiving e-mail address to be used for event notification. This will be used in the "To:"-
field of e-mail sent by the library.
3 Enter the IP address of the SMTP server the library should use. This should be an SMTP server
that will handle or relay e-mail destined for the domain specified in the event notification email
address. This can be found by looking up the MX record of the domain in question in DNS.
address. This can be found by looking up the MX record of the domain in question in DNS.
4 Set severity level. Event notification e-mail will not be generated for errors of a severity below the
one chosen.
The screen also provides a way to verify that the chosen settings are valid by generating a test
notification.
notification.
The path to open the appropriate screen is:
From the RMI, select Setup > Notification