Tandberg Data T40 User Manual

 

StorageLibrary Installation and User Guide 

51  

 Warning 

If the cartridge falls down, it might be damaged and data could be lost.   

Figure 20. Push the Release Knob towards the Cartridge to Eject the Cartridge from the Slot 

  

The right and left magazines are mirrored and can only be inserted into the correct left or right 
magazine bay.  

1.  Enter the back of the magazine into the correct magazine bay. Make sure it is in level with the 

library.  

2.  Slide the magazine carefully in until the eject spring engages. 

3.  Push the magazine further in against the spring until the magazine is latched.  

Figure 21. Push Magazine until it Clicks into Place 

  

In failure situations (either in the library itself, a power loss, or situations where you need to manually 
release the magazines), a manual/emergency release is available. To activate the emergency 
magazine feature, you must use the magazine release tool that is fastened to the rear of the library. 
This tool must be inserted through the hole at the bottom of each magazine. See 

Figure 22. The

 

Release Tool

.  

 Caution 

Make sure to turn off the power before you use the manual emergency release 
tool