ADIC 6-00025-01 User Manual
Accessing Storage Devices
6-00025-01 Rev A
Library List
2-3
ADIC
The following table lists the supported Advanced Digital
Information Corporation (ADIC) models for tape media:
Information Corporation (ADIC) models for tape media:
ADIC Scalar
for Tape
†
Caveats
Scalar Series:
• 100
• 218*
• 220
• 224
• 448*
• 458
• 480
• * Use the
volloc
command and
mediamove
utility to load and unload media in these
libraries.
libraries.
• Scalar 100: The mailbox must be configured
for “Storage”, not “Import/Export.”
• If a Sony AIT drive is connected to an ADIC
Scalar 480 library, make sure the
Configuration Menu on the front panel is set
to “Use Sony AIT.”
Configuration Menu on the front panel is set
to “Use Sony AIT.”
Scalar 1000*
AMASS supports AIT, DLT, and 3590 media in
this library.
this library.
NOTE: If this library has an attached AMU,
AMASS manages the library using DAS
(Distributed AML Server). For information, see
AMASS manages the library using DAS
(Distributed AML Server). For information, see
Scalar 10K
For newest information about the Scalar 10K,
refer to the Release Notes.
refer to the Release Notes.
FastStor 7
Uses a single DLT drive. Therefore, AMASS
commands that require two drives, for example,
commands that require two drives, for example,
volcopy
, are not supported for this library.