DELL E09J User Manual

Back-Panel Ports Connectors (per Storage Controller)

Fibre Channel, iSCSI, or
SAS connectors

Connection to a Fiber Channel fabric, iSCSI network, or a direct connection
to servers with SAS HBAs

Ethernet connectors

MGMT: 10 Mbps, 100 Mbps, or 1 Gbps embedded Ethernet port used for
Storage Center management
REPL: 10 Mbps, 100 Mbps, or 1 Gbps embedded iSCSI port used for

replication to another Storage Center

SAS connectors

6 Gbps SAS connectors for SAS port redundancy and additional expansion
enclosures

NOTE: SAS connectors are SFF-8086/SFF-8088 compliant

USB connector

One USB 3.0 connector.

Not for customer use on SCv2000/SCv2020 storage systems.

Serial connector

NOTE: Not for customer use

LED Indicators

Front panel

• One two-color LED indicator for system status.
• One single-color LED indicator for power status.
• Two digit, seven-segment display indicating the storage system ID

number

• ID button with a single-color LED indicating startup and pressed states

Hard drive carrier

• One single-color activity LED
• One single-color LED status indicator per drive

Storage controller

• Two single-color LEDs per Ethernet port indicating activity and link speed
• Four dual-color LEDs per SAS connector indicating port activity and status
• One single-color LED indicating status
• One single-color LED indicating fault
• One single-color LED for identification
• Eight single-color LED for diagnostics

Power supply/cooling
fan

Four LED status indicators for Power Supply Status, AC Fail status, DC Fail
status, and Fan Fail status

Power Supplies

AC power supply (per power supply)

Wattage

580 W (maximum wattage: 584 W)

Voltage

100–240 VAC (7.6–3.0 A)

Heat dissipation

SCv2000: 65 W at 230 VAC and 99 W at 115 VAC
SCv2020: 65 W at 230 VAC and 99 W at 115 VAC

SCv2000/SCv2020 Technical Specifications