Omega CNiS32 User Manual

This unit is equipped with two physical outputs that can only be configured as
follows: Alarm 1 & Alarm 2, Alarm 1 & Output 2, Output 1 & Alarm 2, Output 1
& Output 2, Analog Out 1 & Alarm 2, Analog Out 1 & Output 2. Analog Out
available only if Analog Output Option board is factory installed.

If Analog Output Option is installed, the controller will skip Alarm 1 Menu
item to Analog Output.

Alarm must be DISABLED if Ramp is ENABLED.

Press  

a

1) Press 

a, if necessary, until CNFG prompt appears.

Press  

d

2) Display advances to 

INPT Input Menu.

Press  

a

3) Press 

a, if necessary, until Display advances to ALR1 Alarm 1

Menu. 

Press  

d

4) Display advances to Alarm 1 

ENBL Enable or DSBL Disable 

Submenu and flashes the previous selection.

26