Campbell Hausfeld AVW100 Leaflet
AVW100 Vibrating Wire Interface
Page 2 of 2
The choice of which instruction to use and the exact parameters required are
specific to the sensor you have. Some details are given in the Campbell Scientific
AVW1/4 manual for some of the Geokon sensors as an example. Most
manufacturers of vibrating wire sensors publish data on how to use their sensors
with Campbell Scientific dataloggers. They usually give full details of the required
parameters needed to get the best readings from each model of their sensor –
please contact your sensor supplier for advice.
specific to the sensor you have. Some details are given in the Campbell Scientific
AVW1/4 manual for some of the Geokon sensors as an example. Most
manufacturers of vibrating wire sensors publish data on how to use their sensors
with Campbell Scientific dataloggers. They usually give full details of the required
parameters needed to get the best readings from each model of their sensor –
please contact your sensor supplier for advice.
Some manufacturers also make this information available on the Internet, e.g. a
useful document is published by Slope Indicator here:
useful document is published by Slope Indicator here:
Copyright © 2004 Campbell Scientific Ltd.
Issued 21.6.04
Issued 21.6.04
Campbell Scientific Ltd,
Campbell Park, 80 Hathern Road,
Shepshed, Loughborough, LE12 9GX, UK
Tel: +44 (0) 1509 601141
Fax: +44 (0) 1509 601091
Email: