Honeywell N431X User Manual
10 - 2
If the engine reads a bar code, but the data is not displayed correctly on the
host screen:
host screen:
•
The engine may not be programmed for the appropriate terminal
interface.
For example, you scan “12345” and the host displays “@es%.”
interface.
For example, you scan “12345” and the host displays “@es%.”
Reprogram the engine with the correct Plug and Play bar code. See
•
The engine may not be programmed to output your bar code data
properly.
For example, you scan “12345” and the host displays “A12345B.”
properly.
For example, you scan “12345” and the host displays “A12345B.”
Reprogram the engine with the proper symbology selections. See
The engine won’t read your bar code at all.
1. Scan the sample bar codes in the back of this manual. If the engine
reads the sample bar codes, check that your bar code is readable.
Verify that your bar code symbology is enabled (see
Verify that your bar code symbology is enabled (see
2. If the engine still can’t read the sample bar codes, scan
If you aren’t sure what programming options have been set in the engine,
or if you want the factory default settings restored, refer to
or if you want the factory default settings restored, refer to