Emerson 20002514 User Manual
2
Mounting
2.1
Mount the sensor
Use your common practices to minimize torque and bending load on process connections.
Tip
To reduce the risk of condensation or excessive moisture, the conduit opening should not point
upward (if possible). The conduit opening of the core processor can be rotated freely to facilitate
wiring.
upward (if possible). The conduit opening of the core processor can be rotated freely to facilitate
wiring.
Procedure
Mounting the sensor
Figure 2-1:
Notes
•
•
Do not use the sensor to support the piping.
•
The sensor does not require external supports. The flanges will support the sensor in any orientation.
CAUTION!
Do not lift the sensor by the electronics. Lifting the sensor by the electronics can damage the
device.
device.
Mounting
4
Micro Motion R-Series