Honeywell SC1000 User Manual
SC Series Instruction Manual page 19
Operat
ing Modes
3
Chapter 3
Operating Modes
3.1 Operating Modes
The SC Series instruments have four modes of operation:
•
INITIALIZE, to test the instrument upon power up
•
RUN, normal operation
•
ERROR, which indicates that an abnormal situation has occurred that
stopped the operation of the instrument
stopped the operation of the instrument
•
SETUP, a menu which allows setup and calibration of the chassis and its
channels
channels
Each of these will be described in this chapter.
3.2 INITIALIZE Mode
When the instrument is powered up or otherwise reset, it enters the INITIALIZE
mode. As the instrument enters this mode, all segments of the display and all
front panel indicator lights (if available) illuminate momentarily. Next, each channel
in the instrument is checked for proper operation.
mode. As the instrument enters this mode, all segments of the display and all
front panel indicator lights (if available) illuminate momentarily. Next, each channel
in the instrument is checked for proper operation.
If a problem is detected, the instrument may enter the ERROR mode.
Depending on the type of channel, other actions may occur. For example, a
Strain-Gage channel will calibrate its analog-to-digital converter and attempt to
read the transducer’s Signature Calibration information. If the transducer is
equipped with Signature Calibration, the transducer’s serial number is displayed
momentarily.
Strain-Gage channel will calibrate its analog-to-digital converter and attempt to
read the transducer’s Signature Calibration information. If the transducer is
equipped with Signature Calibration, the transducer’s serial number is displayed
momentarily.