Leica 6007282 User Manual

Roteo 20HV/25H/35/35G - 1.2.0en

laser head will start rotating (Roteo 20HV/35/35G: 
300 rpm, Roteo 25H: 600 rpm).
In manual mode, the laser does not self-level; this 
means that the beam will rotate even if the laser is not 
leveled. It can therefore be used on inclined planes such 
as stairs, roofs, or when manual grade setting is 
required. See later section on setting slope in manual or 
semi-automatic modes.

The H.I. feature stops the laser automatically and 
sounds an alarm if the laser is disturbed, preventing 
inaccurate readings. It functions only when selected.

X

To activate this safeguard feature, press the H.I. key 
{B-4} after turning on the laser. The H.I. LED {B-12} 
will blink rapidly while the laser is self-leveling.

X

Thirty seconds after the head starts to rotate, the LED 
will blink slowly, indicating the H.I. Alert function is 
activated.

X

If the laser is disturbed while in H.I. Alert mode, the 
head will stop rotating, the beam will turn off, the LED 
indicator will be on continuously, and an alarm will 
sound (Roteo 35/35G).

X

On Roteo 20HV and 25H models all LEDs will be on 
continuously when disturbed in H.I. mode.

X

Press the H.I. key to turn off the H.I. Alert function. 
Check to see if the beam elevation has changed from 
its original benchmark position. 

X

The laser is no longer in H.I. Alert mode. Press the H.I. 
key to re-activate the H.I. Alert function.

The head rotates at four speeds: 0, 150, 300, 450, 600 
rpm. The default setting is 300 rpm. The laser beam is 
more visible at slower rotation speeds.

X

To increase the rotation speed press the Plus key 
{B-9}. Press the Minus key {B-8} to decrease speed. 
Press and hold the Minus key to stop rotation.

X

When the beam is stopped, the point can be moved to 
the right or left using the Counter-clockwise / Clock-
wise (CCW/CW) rotation keys {B-6 and B-7}. You can 
also move the head manually to position the beam 
point. To start rotation again, press the Plus key {B-9}.

For interior applications, scanning mode allows you to 
see the beam easier at a distance.

X

To scan press the Scan / Rotation key {B-2}. The 
beam will blink until the laser has self-leveled.

X

To increase the scan length press the Plus key {B-9}. 
Press the Minus key {B-8} to decrease the scan 
length.

X

The scanning beam can be moved to the right or left 
using the Counter-clockwise / Clockwise (CCW/CW) 
rotation keys {B-6 and B-7}.