Makita DPC7311 User Manual

19

Push the combination switch (10) down to position             .

Grasp the tubular handle firmly with one hand and press the 

Power Cut against the ground.
Place the tip of your left foot in the rear handle.
Pull the starter cable strong and rapidly until you hear the 

first audible ignition.
CAUTION: Do not pull out the starter cable more than approx. 

50 cm, and lead it back by hand.
Depress decompression valve (5) again.
Put the combination switch (6) in position “I”.

Keep pulling the starter cable until the engine catches.

As soon as the engine is running, press the throttle (9) to release 

the half-throttle lock (7), allowing the engine to idle.

As described under ”Cold starting”, except without putting the 

combination switch (6) in choke position.