Grizzly G0529 User Manual

-20-

G0529 Oscillating Spindle & Disc Sander

serious personal injury

could occur if you con-

nect your machine to the

power source during the

maintenance process.

do not connect the

machine to the power

source while performing

any maintenance on this

machine.

your safety is important! please follow the

warnings below during this entire section:

check for the following conditions before you

use the sander:

• loose table bolts.

• Worn or damaged sanding discs or

sleeves.

• Worn or damaged wires.

• any other condition that could hamper

the safe operation of this machine.

perform the following tasks at the scheduled

time intervals:

after each use

• Wipe off the sawdust build-up from

the table surface.

• turn off power switch and remove

the

switch key.

• Check for spindle straightness.

Weekly

• Wipe a lubricant such as Slipit

®

onto

the table.

• all the bearings are permanently

lubricated and require no further lubri-
cation

long-term storage

• Keep unpainted surfaces rust free

with products such as Boeshield

®

t-9.

schedule

maintenance safety

section 7: maintenance