Sony NSR-1100 User Manual
NSR-1000 Series v1.1.1 Release Note
５-１-１-４ 4CIF resolution support
Newly supports 4CIF resolution (PAL: 704x576, NTSC: 704x480) for the Sony IP
network cameras.
Supported model name and firmware version are as follows:
network cameras.
Supported model name and firmware version are as follows:
Camera Model Name
Camera Firmware Version
SNC-RX530
3.10/2.40 or higher
SNC-RX550
3.10/2.40 or higher
SNC-RX570
3.10/2.40 or higher
SNC-CS50
2.30 or higher
SNC-RZ50
2.40 or higher
SNC-DF50
1.20 or higher
SNC-DF80
1.20 or higher
SNC-DF85
1.20 or higher (*1)
*1 When you want to select the image size of more than 4CIF on SNC-DF85,
the firmware version of the camera should be V1.02 or higher. If the former
version, do not select 4CIF in the image size setting.
the firmware version of the camera should be V1.02 or higher. If the former
version, do not select 4CIF in the image size setting.
５-１-１-５ Highlight function
Newly supports the highlight function that displays flashing red frames around
images in the custom layout at the occurrence of related alarm/event. For details,
refer to the User’s Guide.
images in the custom layout at the occurrence of related alarm/event. For details,
refer to the User’s Guide.
５-１-１-６ Auto-logon function
Newly supports the auto-logon function that allows you to be logged on without being
certificated by the NSR-1000 series at start-up. For details, refer to the User’s Guide.
certificated by the NSR-1000 series at start-up. For details, refer to the User’s Guide.
５-１-１-７ ONVIF support
Newly supports ONVIF Version 1.01.
・
Auto Registration and Multiple Camera Registration are not supported.
Please specify a Device Type "ONVIF".
Please specify a Device Type "ONVIF".
・
Only supports JPEG streaming.
・
It is not guaranteed to connect to all ONVIF V1.01 conformant products.
- 33 -