Agilent Technologies E4445A User Manual
412
Chapter 5
One-Button Measurement Functions
Meas Setup (Harmonic Distortion)
O
n
e-
But
ton
M
easur
e
m
e
nt
Funct
ions
Remote Command:
[:SENSe]:HARMonics:SWEeptime:STATe OFF|ON|0|1
[:SENSe]:HARMonics:SWEeptime:STATe?
[:SENSe]:HARMonics:SWEeptime <time>
[:SENSe]:HARMonics:SWEeptime?
Remote Command Notes: ON is equal to automatic (Auto). OFF is equal to manual
(Man).
Example:
HARM:SWE:STAT OFF
HARM:SWE 100 ms
5.16.5
Range Table (On/Off)
Press Range Table to specify whether the range table is to be used or not. When
Range Table
is set to
Off
the harmonics are measured. When
Range Table
is set to On the first active
range is considered to be the fundamental and the subsequent active ranges are used as
the harmonics. At least two ranges must be active if
the harmonics. At least two ranges must be active if
Range Table
is set to
On
.
Key Path:
Meas Setup
Factory Preset: See
.
Range:
Off|On
History:
Added with firmware revision A.03.00
Remote Command:
[:SENSe]:HARMonics:RTABle:STATe OFF|ON|0|1
[:SENSe]:HARMonics:RTABle:STATe?
Example:
HARM:RTAB:STAT OFF