Porter-Cable PCB370SS User Manual
21
MAINTENANCE
WARNING
!
For your own safety, turn the switch off and remove the
plug from the power source outlet before maintaining or
lubricating your scroll saw.
plug from the power source outlet before maintaining or
lubricating your scroll saw.
GENERAL MAINTENANCE
Frequently blow out dust and grit that accumulates in
the motor housing using compressed air.
Frequently blow out dust and grit that accumulates in
the motor housing using compressed air.
ALWAYS use safety glasses. Everyday eyeglasses
are NOT safety glasses. Also use face or dust mask if
cutting operation is dusty. ALWAYS WEAR CERTIFIED
SAFETY EQUIPMENT:
are NOT safety glasses. Also use face or dust mask if
cutting operation is dusty. ALWAYS WEAR CERTIFIED
SAFETY EQUIPMENT:
• ANSI Z87.1 eye protection (CAN/CSA Z94.3),
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratory protection.
• ANSI S12.6 (S3.19) hearing protection,
• NIOSH/OSHA/MSHA respiratory protection.
An occasional coat of paste wax on the work table will
allow the wood being cut to glide smoothly across the
work surface.
To avoid shock or fire hazard, if the power lead is worn
or cut in any way, replace it immediately.
allow the wood being cut to glide smoothly across the
work surface.
To avoid shock or fire hazard, if the power lead is worn
or cut in any way, replace it immediately.
WARNING
!
WARNING
!
LUBRICATION
Ball bearings in the scroll saw are packed with grease at
the factory and require no further lubrication.
Ball bearings in the scroll saw are packed with grease at
the factory and require no further lubrication.
Use only mild soap and a damp cloth to clean the tool.
Never let any liquid get inside the tool; never immerse
any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(other than those listed in this manual) should be
performed by authorized service centers or other
qualified service organizations, always using identical
replacement parts.
Never let any liquid get inside the tool; never immerse
any part of the tool into a liquid.
IMPORTANT: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(other than those listed in this manual) should be
performed by authorized service centers or other
qualified service organizations, always using identical
replacement parts.