Festool MFT 1080 Leaflet

AVAILABLE THROUGH:

Your Festool dealer, or

Festool USA/Tooltechnic Systems, LLC

140 Los Carneros Way, Goleta, CA  93117

The MFT connectors fit the 

“T” slots around the 

perimeter of the MFT

2 are needed to connect 2 tables together

The MFT connectors (on 

the outside) are thicker 

than the guide rail 

connectors

Two 1080 MFT’s joined

together side by side to 

form a large work surface 

Two 1080 MFT’s joined

together end to end to 

form a long work surface

The MFT table connector can be used to connect 

2 or more Multi-Function Tables to get a larger 

work surface. These strong metal bars with 4 set

screws slide into the “T” track spanning the tables

to be joined as shown below. 

For big jobs where a large surface with very versatile

clamping options is needed. MFT’s can also be joined 

together and be used with a long guide rail 

(e.g. FS 1900/2) to increase the cutting

capacity of the MFT. 

• Large work surface that supports big work 

pieces – secure working environment can 

enhance working speed and results.

• Increases cutting capacity of single MFT’s and 

makes them more versatile – better use of 

existing equipment

• Sturdy construction and high quality materials –

long product lifetime saves on replacement costs.

• MFT 1080 (item no. 492 652): Large, strong, 

sturdy and portable work table for shop-level

precision on the jobsite.

• MFT 800 (item no. 492 651): Smaller version of 

the MFT 1080, but with all of the same features. 

• Replacement top (item no. 489 396 for MFT 

1080; item no. 486 565 for MFT 800)