Husqvarna 1152450-26 User Manual
English
– 15
STARTING AND STOPPING
Before starting
K3000 Wet
Water connector
•
Connect the water hose to the water supply (A).
The water is switched on and off with the water tap (B).
Starting
•
Grip the front handle with the left hand.
•
Grip the rear handle with your right hand.
•
Press in the power switch lock with your right-hand thumb
and press in the power switch.
and press in the power switch.
•
Run the machine unloaded and in a safe manner for at
least 30 seconds.
least 30 seconds.
Stopping
Stop the motor by releasing the power switch.
!
WARNING! Note the following before
starting:
starting:
The machine should be connected to an
earthed outlet socket.
earthed outlet socket.
Check that the mains voltage corresponds
with that stated on the rating plate on the
machine.
with that stated on the rating plate on the
machine.
Make sure you have a secure footing and
that the cutting blade cannot touch anything.
that the cutting blade cannot touch anything.
Keep people and animals well away from the
working area.
working area.
!
WARNING! The machine (Great Britain 120V)
is not equipped with a ground fault circuit
interrupter. The machine must always be
used with an isolating transformer for
protection in case an electrical fault should
occur.
is not equipped with a ground fault circuit
interrupter. The machine must always be
used with an isolating transformer for
protection in case an electrical fault should
occur.
!
WARNING! The cutting blade continues to
rotate for some time after the motor has
stopped.
rotate for some time after the motor has
stopped.