KUHN RIKON 10" Cabinet Saw Sliding Table User Manual

1. Adjust the hold down plate according to the 
width of material to be cut.

2. Lay the workpiece onto the table and up against 
the saw fence. 

3. Slide the workpiece through the saw blade until 
the material engages the hold down plate. Walk 
the workpiece through the cut with the sliding table 
until the workpiece clears the saw blade and the 
cut is completed. 

For cross cutting panels and narrow stock, position 
the miter fence onto the sliding table carriage as 
shown. Tighten lock knobs. (Fig. 24)

Making sure that table lock is disengaged, postion 
the workpiece against the miter fence and push 
sliding table through the cut.

Loosen the lock knob on the right side of the 
miter fence (closest to blade) slightly and use as a 
pivot point. Loosen the lock knob on the left side of 
the miter fence and position the miter fence to the 
desired angle using the scale on the sliding table 
carriage. (Fig. 25)

14