Manualsbrain.com
  1. Manuals
  2. Brands
  3. Husqvarna
  4. FS4800D
  5. User Manual

Husqvarna FS4800D User Manual

Download
Page of 112
9
*****************
This saw was designed for certain applications only.  DO NOT modify this saw or use for any application other 
than for which it was designed. If you have any questions relative to its application, DO NOT use the saw until 
you have written Husqvarna Construction Products and we have advised you.
 
Husqvarna Construction Products North America
17400 West 119th Street
Olathe, Kansas  66061
USA   
DO NOT  operate this machine unless you have read and understood this operator’s manual.
DO NOT  operate this machine without the blade guard, or other protective guards in place.
DO NOT  stand behind or in front of the blade path while the engine is running.
DO NOT  leave this machine unattended while the engine is running.
DO NOT  work on this machine while the engine is running.
DO NOT  operate this machine when you are tired or fatigued.
DO NOT  use a wet blade without adequate water supply to the blade.
DO NOT  exceed maximum blade speed shown for each blade size.  Excessive speed could result in  
blade breakage.
DO NOT  operate the machine if you are uncertain of how to run the machine.
DO NOT  use damaged equipment or blades.
DO NOT  touch or try to stop a moving blade with your hand.
DO NOT  cock, jam, wedge or twist the blade in a cut.
DO NOT  transport a cutting machine with the blade mounted on the machine.
DO NOT  use a blade that has been dropped or damaged.
DO NOT   use carbide tipped blades.
DO NOT  touch a dry cutting diamond blade immediately after use.  These blades require several minutes to cool 
after each cut.
DO NOT  use damaged or worn blade flanges.
DO NOT  allow other persons to be near the machine when starting, refueling, or when  the machine is in operation.
DO NOT  operate this machine in an enclosed area.  Breathing Poison Exhaust Gas could result in death.
DO NOT  operate this machine in the vicinity of anything that is flammable.  Sparks could cause a fire  
or an explosion. 
DO NOT  allow blade exposure from the guard to be more than 180 degrees.
DO NOT  operate this machine with the belt guards or blade guard removed.
DO NOT  operate this machine unless you are specifically trained to do so.
DO NOT  use a blade that has been over heated (Core has a bluish color).
DO NOT  jam material into the blade.
DO NOT  grind on the side of the blade.
DO NOT  tow this machine behind a vehicle.
DO NOT  use the tie down brackets for lifting this machine.
DO NOT  operate this machine with the any guards or shields removed.
DO NOT  cut deeper than 1” per pass with a dry blade.  Step cut to achieve deeper cuts.
DO NOT  operate this machine while under the influence of drugs or alcohol.
SAFETY FIRST!
WARNINGS
DO’s AND DO NOT’s
WARNING:
 
FAILURE TO COMPLY WITH THESE WARNINGS AND OPERATING 
INSTRUCTIONS COULD RESULT IN DEATH OR SERIOUS BODILY INJURY.
DO NOT